PuSH - Publikationsserver des Helmholtz Zentrums München

Ding, Y. ; Wohlleben, W.* ; Boland, M.* ; Vilsmeier, K.* ; Riediker, M.*

Nano-object release during machining of polymer-based manocomposites depends on process factors and the type of nanofiller.

Ann. Work Expo. Health 61, 1132-1144 (2017)
Postprint DOI PMC
Open Access Green
We tested the nanomaterial release from composites during two different mechanical treatment processes, automated drilling and manual sawing. Polyurethane (PU) polymer discs (1-cm thickness and 11-cm diameter) were created using different nanomaterial fillers: multiwall carbon nanotubes (MWCNT), carbon black (CB), silicon dioxide (SiO2), and an unfilled PU control. Drilling generated far more submicron range particles than sawing. In the drilling experiments, none of the tested nano-fillers showed a significant influence on particle number concentrations or sizes, except for the PU/MWCNT samples, from which larger particles were released than from control samples. Higher drilling speed and larger drill bit size were associated with higher particle counts. Differences between composites were observed during sawing: PU/CB released higher number concentrations of micro-sized particles compared to reference samples. When sawing PU/SiO2 more nanoparticle agglomerates were observed. Furthermore, polymer fumes were released during sawing experiments, which was attributed to the process heat. For both drilling and sawing, the majority of the aerosolized particles were polymer matrix materials containing nanofillers (or protruding from their surface), as evidenced by electron microscopic analysis. Results suggest that: (i) processes associated with higher energy inputs are more likely to result in higher particle release in terms of number concentration; (ii) nanofillers may alter release processes; and (iii) other types of released particles, in particular polymer fumes from high-temperature processes, must also be considered in occupational exposure and risk assessments.
Altmetric
Weitere Metriken?
[➜Einloggen]
Zusatzinfos bearbeiten [➜Einloggen]
Publikationstyp Artikel: Journalartikel
Dokumenttyp Wissenschaftlicher Artikel
Korrespondenzautor
Schlagwörter Composite Processing ; Drilling ; Nanoparticle Release ; Sawing ; Workplace Exposure; Epoxy-based Nanocomposite; Carbon Nanotubes; Worker Exposure; Fume Fever; Composites; Nanoparticles; Nanomaterials; Black; Identification; Nanofibers
ISSN (print) / ISBN 2398-7308
e-ISSN 2398-7316
Zeitschrift Annals of Work Exposures and Health
Quellenangaben Band: 61, Heft: 9, Seiten: 1132-1144 Artikelnummer: , Supplement: ,
Verlag Oxford University Press
Verlagsort Oxford
Nichtpatentliteratur Publikationen
Begutachtungsstatus Peer reviewed
Institut(e) Lung Health and Immunity (LHI)