PuSH - Publikationsserver des Helmholtz Zentrums München

Koch, A.* ; Friederici, L.* ; Fiala, P.* ; Springer, A.* ; Di Bucchianico, S. ; Stintz, M.* ; Frank, M.* ; Rüger, C.P.* ; Streibel, T. ; Zimmermann, R.

Impact of thermal stress on abrasive dust from a carbon fiber-reinforced concrete composite.

Fibers 10:39 (2022)
Verlagsversion Forschungsdaten DOI
Open Access Gold
Creative Commons Lizenzvertrag
Recently, a novel corrosion-resistant construction material, Carbon Concrete Composite (C3 ), consisting of coated carbon fibers embedded in a concrete matrix, was introduced. However, thermal exposure during domestic fires may impact the release of organic pollutants and fibers during abrasive processing and/or demolition. Consequently, the objective of this study was to explore the emission characteristics of toxic compounds and harmful fibers during the dry-cutting after exposure to 25–600◦C (3 h, air). These parameters mimic the abrasive machining and dismantling after a domestic fire event. Mass spectrometry and chromatography served as analytical methodologies, and no organic pollutants for exposure temperatures ≥ 400◦C were found. In contrast, significant amounts of pyrolysis products from the organic fiber coating were released at lower temperatures. Studying the morphology of the released fibers by electron microscopy revealed a decrease in fiber diameter for temperatures exceeding 450◦C. At ≥550◦C, harmful fibers, according to the World Health Organization (WHO) definition, occurred (28–41 × 104 WHO fibers/m3 at 550–600◦C). This leads to the conclusion that there is a demand for restraining and protection measures, such as the use of wet cutting processes, suction devices, particle filtering masks and protective clothing, to handle thermally stressed C3 .
Altmetric
Weitere Metriken?
[➜Einloggen]
Zusatzinfos bearbeiten [➜Einloggen]
Publikationstyp Artikel: Journalartikel
Dokumenttyp Wissenschaftlicher Artikel
Korrespondenzautor
Schlagwörter Carbon Fibers ; Concrete ; Evolved Gas Analysis ; Mass Spectrometry ; Scanning Electron Microscopy ; Thermal Exposure ; Who Fibers
ISSN (print) / ISBN 2079-6439
e-ISSN 2079-6439
Zeitschrift Fibers
Quellenangaben Band: 10, Heft: 5, Seiten: , Artikelnummer: 39 Supplement: ,
Verlag MDPI
Nichtpatentliteratur Publikationen
Begutachtungsstatus Peer reviewed
Institut(e) Cooperation Group Comprehensive Molecular Analytics (CMA)
Förderungen Horizon 2020
Technische Universität Dresden
Bundesministerium für Bildung und Forschung
Deutsche Forschungsgemeinschaft
European Commission
Zwanzig20-Partnerschaft für Innovation
University of Rostock/University Medical Center Rostock
Institute of Construction Management